This high-performance driveshaft set – optionally including wheel hubs – allows you to design the drivetrain of your Mercedes-Benz W202, C208, or R170 for extremely high power and torque without having to modify the brake system, wheel bearings, or wheel carriers in any way. The outer dimensions of the wheel hubs are identical to the original part, while the splines for the driveshaft are significantly stronger and more robust. With 30 teeth (Z30) and a larger pitch circle diameter, enormous torques can be transmitted, torques under which the original splines (Z25) typically fail and break.
After upgrading to the larger 210mm differential with our special differential cover, the next weak points are typically the drive shafts, especially where the splines mesh. These high-performance wheel hubs, in combination with our reinforced drive shafts, unlock the next level of transmission potential, allowing us to confidently approve them for up to 800 hp .
The wheel hubs are precision-manufactured from high-strength chromium-molybdenum steel with a tensile strength of at least 950 N/mm², thus exceeding the strength values of original wheel hubs by almost 10%.
Technical details:
- drive shafts
- Without ABS ring: Premium manufacturer
- With ABS ring: Proven mid-range manufacturer
- Spline: z30
- Bearing for differential: 110mm
- Bearing to steering knuckle: 102mm
- Bolt pattern: 6x94
- hub
- Spline: z30
- Material: 42CrMo4
- Tensile strength: Min. 950 N/mm²
- Bolt pattern: 5x112
- Wheel bolt thread: M12x1.5
- For wheel bearings: Inner diameter 45mm, width 39mm
Please select your preferred option:
- Option 1: 2x drive shafts without ABS ring (without wheel hubs)
- This option can only be installed when the steering knuckle lacks an ABS sensor mount! Otherwise, this mount would need to be ground down slightly. The drive shafts are from a premium manufacturer in the industry.
- Option 2: Complete set with 2x drive shafts without ABS ring and 2x wheel hubs
- This option can only be installed when the steering knuckle lacks an ABS sensor mount! Otherwise, this mount would need to be ground down slightly. The drive shafts are from a premium manufacturer in the industry.
- Option 3: 2x drive shafts with ABS ring (without wheel hubs)
- This option can be installed on steering knuckles both with and without ABS sensors. The drive shafts are sourced from a proven mid-range manufacturer in the industry.
- Option 4: Complete set including 2x drive shafts with ABS ring and 2x wheel hubs
- This option can be installed on steering knuckles both with and without ABS sensors. The drive shafts are sourced from a proven mid-range manufacturer in the industry.
Important: This kit is only compatible if a corresponding Mercedes 210mm differential with the appropriate drive shaft flanges has been installed. We recommend 210mm differentials from the W203 and W210 models with, for example, i=2.82 or i=2.65.
This item is a motorsport product and is not approved for use on public roads in Germany (StVZO). It may only be used in motorsport. We also refer to Sections 21 and 27, Paragraph 2 of the StVZO.
