Mercedes M113 sports camshafts dbilas - 260°/268°

Delivery time is about 2-3 weeks

High-quality dbilas dynamic sports camshaft set of the "Street" type for all Mercedes M113 4.3l - 5.5l engines.

Suitable for many models such as: W202 C43AMG, W210 E430, W210 E55AMG, C208 CLK430, C208 CLK55AMG, C209 CLK500, R129 SL500, R171 SLK55AMG, etc.

Technical details:

• Degrees: 260°/268°
  
• Spread: 114
  
• Valve lift: 10.8mm
• Stroke at TDC: 0.5mm/1.0mm
• Timing: 16/64 - 68/20
  
• Valve clearance: -

Scope of delivery:

• 1x camshaft left bank
  
• 1x camshaft right bank
  

This article is a motor sport article, which is not approved according to the StVZO. This may only be used in motorsport. We also refer to §21 and §27 paragraph 2 of the StVZO.

Notes on the camshaft program from dbilas dynamic:

For a better overview, we have specified the area of ​​application we recommend for each camshaft.

Road: With this type of camshaft, no further modifications to the engine are required.

Sport: With this type of camshaft, the mixture preparation must be modified.

Rally: This type of camshaft is intended for use in rally or slalom vehicles.

Circuit: This type of camshaft is intended for use in long-distance races, hill climbs and drag races.

In principle, all camshafts are available from stock.

Reinforced valve springs are required for some camshafts. For this we have developed valve spring sets made of high-quality material. When ordering camshafts, please inquire whether reinforced valve springs are required. The order number in the spring set section contains all the necessary parts such as spring pads, valve spring plates, etc. We can supply individual parts on request.

When ordering, please state the exact vehicle data and the area of ​​use of the vehicle, e.g. road, sport, rally, circuit, etc

When changing the camshaft, always make sure that the parts that come into contact with the cam, such as rocker arms, tappets, valve shims, etc., are also replaced to prevent damage to the cam surface.

All camshafts are supplied with precise installation and adjustment data and, unless otherwise specified, are to be installed like standard camshafts.